Air Quality Environmental Samplers

Environmental samplers, as the name implies, are teams that take samples of certain compounds from the air for later analysis and determination of air quality parameters. These samplers may or may not have US EPA approval and are designed to collect a sample either in a filter or in some other medium under conditions specified by the air quality protocols of the US EPA. This sample must meet certain requirements which the instruments must consider the sample collection, ensuring that the sample is representative of the environment where it was taken. These samplers serve to collect gases and particulate material and meet all the requirements for the collection of these samples according to US EPA best practices.

  • Filter
Imagen 125
Producer: TISCH

The Tisch Environmental TE-Wilbur is the most advanced low volume air sampler system in the industry. The TE-Wilbur can be configured for TSP, PM10, PM2.5, PM1 as well as any other particulate separation...

Imagen 129
Producer: TISCH

A PM10 high volume air sampler is a federal reference method (FRM) instrument designed to collect ambient particulate matter with an aerodynamic diameter of 10µm or less.  This sampler uses a size...

Imagen 131
Producer: TISCH

The Tisch Environmental PM2.5 high volume air sampler is a non-Federal Reference Method sampler for the collection of particulate matter that is 2.5µm or less.  Its primary uses is for non regulatory...

Imagen 130
Producer: TISCH

A Total suspended particulate sampler or TSP high volume air sampler is used for the collection of total suspended particulate matter in ambient air with no preference to size selection. The US EPA reference...

Imagen 132
Producer: TISCH

Environmental particulate material sampler for measurement of polyurethane foam particles and pesticide particles and vapors under the TO4A, TO9A and TO13 method. High volume sampler 200-280 L / min with...

Imagen 133
Producer: NEW START

The RAC 3-Gas Sampler is a wet-chemical system that samples ambient air for up to three different pollutant gases simultaneously and features a thermoelectric system to assure maximum accuracy for SO2 sampling.

Imagen 126
Producer: BGI

Environmental sampler for particulate material for measurement of TSP, PM10 and PM2.5 with US EPA approval for PM2.5 and PM10. Low flow sampler with 16.7 L / min of low operating cost and consumables,...

Imagen 128
Producer: BGI

Environmental sampler for particulate material for measurement of TSP, PM10, PM2.5 and PM1 without US EPA approval. Portable sampler weighing less than 5 pounds with low flow of 5 L / min with low operating...

Do you have any Questions, Request for Quotation, Suggestions?

It will be a pleasure to serve you.