The US Environmental Protection Agency (EPA) encourages state and local air monitoring groups to conduct short-term multi-site pollutant monitoring studies using non-reference method, small portable samplers.
The concept is to “saturate” an area with easily deployed, inexpensive filter samplers, to assess air quality in areas with high concentrations of pollutants or at reclamation sites. BGI has brought this approach to its ultimate development with the addition of a true 5 liter per minute (LPM) inlet.
The additional data acquired using saturation samplers helps air pollution control agencies to evaluate their monitoring networks consistent with requirements in 40 CFR Part 58.
Fence Line Monitoring
Saturation and Spacial Testing
Remote Location Monitoring
Indoor Air Quality
iniPM™ Multi-cut Inlet, for TSP, PM10, PM2.5, PM1 and PM4
Inlet is verified by Health and Safety Executive (HSE) air sampling standards for entry bias ensuring reference method data quality
Light weight and field portable (< 5 lbs.)
Power: AC, DC and solar
Runs for up to 48 hours on internal DC battery
Default configuration is PM10
Flow Rate: 5 lpm (± 1%)
Temp. Operational Range: -30° C to 50° C
Temp. Reading Range: -30° C to 50° C (±0.5° C)
Barometric Pressure Range: 400 to 800 mm of Hg (± 5mm)
Dimensions: Control Module: 8.50 in high (21.59 cm) x 7.00 in. wide (17.78 cm) X 5.75 in deep (14.60 cm)
Weight: 9.0 lbs (4.08 kg)
Inlet: Dimensions: 3.25 in max dia, (8.25 cm) 7.5 in high (19.05 cm)